Disarm Your Alarm System Before Entering Your Home!

Tired of hearing that loud, annoying alarm every time you walk in the door? Now you can disarm your alarm system before you walk in with a pocket-sized keychain remote!

The Code Encryptor II module installs directly into the data bus of your alarm system, so you don't have to sacrifice a security zone to add this feature to your alarm system. Your alarm system reads the Code Encryptor II as another expansion board on the data bus (for example, on our popular #7500P alarm system, it "looks" like a wireless receiver module). When you connect the Code Encryptor II to your alarm system, it will automatically recognize your alarm system and program itself accordingly! Mount the unit next to your alarm system's controller board and it will draw all of the power it needs directly from the alarm system. The unit can operate in temperatures from -5 F to 140 F, so you can mount it virtually anywhere!

The Encryptor II comes with an LED plate, which allows you to check the status of your alarm system from a remote location, like the garage. This allows you to arm or disarm your alarm system on your way in or out of the house, and then check the LED plate to make sure the system received your signal.

The included keychain remote has three buttons, the first allowing you to disarm the system (press and release), arm in the "away" mode (press and release again), or arm in the "home" mode (press and hold for 3 seconds). The second button can be programmed to open any garage door (even those with rotating codes, like Genie)! The red button can be programmed for use as a panic button (press and hold for 3 seconds) or as a relay output, to activate a door strike. Order additional remotes for each member of your family (max. total of 7 remotes)!

The remote has a range of 80 to 100 ft. Use the Code Encryptor II (#7436II) with these security systems offered by Smarthome: #7470, #7476, #7500P, #7930.